Position:Home>>Welding material
Email:ebiz@ctia.com.cn
Related Links
Welding material
Welding material
Welding is the process of uniting two metal parts by melting the materials at their interface so that they will bond together. A filler material is typically used to join the two parts together. The parts being joined are referred to as base metal and the filler is referred to as weld metal. Since structural welding is typically done by an electrical arc process, the weld metal is typically supplied via weld electrodes, sometimes known as welding rods.
Stainless Steel Welding Wire includes chromium stainless steel welding wire and nickel- chromium stainless steel welding wire. Nickel-chromium stainless steel welding wire enjoys a very wide range of applications. Its corrosion resistance and oxidation resistance are considered as “excellent”. It is used for power station, chemical industry, oil industry, medical instrument, fitment, decorating and so on.
Type: Brass Wire
Wire Gauge: 0.8-6.0
Cu (Min): 60%
Ultimate Strength (≥ MPa): 300
Material: Copper / Copper Alloy
Wire Gauge: 0.8-6.0
Cu (Min): 60%
Ultimate Strength (≥ MPa): 300
Material: Copper / Copper Alloy
Introduction: This is a TiO2-based CO2 gas-shielded flux-cored wire, performance welding process, small spatter, stable arc, slag off easy, beautiful weld shape, all position welding.
Standard: GB/T10045-2001 E501T-1, AWS A5.20-1995 E71T-1
Standard: GB/T10045-2001 E501T-1, AWS A5.20-1995 E71T-1
Heat resistant steel has creep resistance, oxidation resistance, hydrogen brittleness resistance and corrosion resistance under the high temperature.
Type: Mild steel welding wire
Diameters: 0.6mm, 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.4mm, 1.6mm, etc.
Melting Point: 2000
Weight: 20kg
Material: Stainless Steel
Diameters: 0.6mm, 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.4mm, 1.6mm, etc.
Melting Point: 2000
Weight: 20kg
Material: Stainless Steel
A nickel based alloy is a primarily an alloy whose chief constituent is nickel. Nickel based alloys are of vital importance to industry due to their ability to withstand a variety of severe operating conditions that involves high stresses, corrosive environment, high temperatures and other combinations thereof.
Type: Zinc-Copper Nickel MIG welding wire
Diameters: 0.8mm-2.0mm.
Material: Cu 46%-50%, Ni 9%-11%, Zn 33%-45%
Diameters: 0.8mm-2.0mm.
Material: Cu 46%-50%, Ni 9%-11%, Zn 33%-45%
The aluminum and aluminum alloy welding wire can be applied for the MIG or the TIG welding with bobbin or longitudinal cut. It contains pure aluminum, aluminum-silicon and aluminum-magnesium welding wire according to the components.